The Only Product Specially Designed to
Clean Glasses Safely and Effectively
No Sprays. No Liquids. No Wipes. No Cloths.
Dust and fingerprint oils account for approximately 99.9% of everyday lens contaminants. is specifically designed to remove them safely.
No Sprays. No Wipes. No Waste.
Replacement Cleanings Pads
Replace the Cleaning Pads
Simply replace the cleaning pads instead of buying a new Peeps® unit.
Objective
Materials
• Two sets of cleaning pads are provided inside a sealable white plastic box.
• The cleaning pads are made of soft microfiber and coated with a proprietary carbon nano-particle compound that absorbs fingerprint oils.
Method
• Follow the Full Cleaning Tutorial video below.
• Gently twist the old Cleaning Pad a ¼ turn and pull it off the Arm joint.
• Gently place the new Cleaning Pad onto the Arm joint and twist a ¼ turn into the locked position.
Benefits
• The Cleaning Pads are always protected from contamination.
• Two sets of Replacement Cleaning Pads offer up to 1,000 additional cleaning applications.
• Lower cost than buying new Peeps® units
• Environmentally friendly by reducing the amount of waste sent to landfills
Now that you understand your lenses, here’s how to clean them properly with
STEP ONE
Use the Brush to Remove Dust
Protect the AR coating by first removing dust and potentially abrasive particles from the lens surface.
Objective
• The brush is made of soft, natural goat-hair bristles
• The brush uses a plastic slider to move in and out
Materials
• Slide the brush out and gently remove any dust or particles.
• Slide the brush back into its original position.
Method
• Will not damage the AR coating.
• The brush’s retractable slider makes it convenient to open and close while maintaining a compact size.
• The brush is protected from contamination.
Benefits
Method
• The cleaning pads are made of soft microfiber and coated with a proprietary carbon nano-particle compound that absorbs fingerprint oils.
•The shape of the cleaning pads is designed to fit into hard-to-reach corners of the lenses
• This proprietary carbon nano-particle compound safely removes oils from the lens surface.
Materials
• Gently slide the arms out along the track and place the lens between the cleaning pads.
• Gently squeeze the arms, so the cleaning pads touch the surface of the lens.
• Clean the lens using gentle circular motions.
• In very dry environments, lightly breathe on the lens surface.
• When finished, gently slide the arms back into the track to close the PEEPS®.
Benefits
• Will not damage the AR coating.
• Removes fingerprints from both sides of the lens.
• The cleaning pads are protected from contamination.
STEP TWO
Use the Cleaning Pads to Remove Fingerprint Oils
Remove fingerprint oils from the lens surface safely and effectively.
Objective
STEP THREE
Recharge the Cleaning Pads
Automatically prepare the cleaning pads for repeated applications.
Objective
Materials
• A foam pad is located inside the cap.
• The foam pad is coated with the same proprietary carbon nano-particle compound used on the cleaning pads.
• Sliding the arms in and out of the cap causes the cleaning pads to rub against the surface of the foam pad, automatically recharging them for the next use.
Method
• The cleaning pads automatically recharge for up to 500 applications.
• The foam pad remains protected from contamination.
• There is no expiry date because there are no liquids to dry out.
• The cleaning pads are replaceable.